NEC Express5800 User Manual page 303

6.
Put the removed file bay gently on an anti-static desk.
7.
Remove the four screws from the factory-installed optical disk drive, then remove the
factory-installed optical disk drive.
8.
Insert the optional DVD SuperMULTI drive in the place from where the factory-installed
optical disk drive was removed.
9.
Insert the file bay into the server chassis.
Push the file device as shown in the figure below until a click occurs to lock it.
10.
Connect the interface and power cables to the optional DVD SuperMULTI drive.
See Chapter 10 for details.
11.
Install the components you have removed in earlier steps.
Removal
The optional DVDSuperMULTI drive can be removed in the reverse order of the installation.
Upgrading Your Server 9-47