Raid System Configuration; Webbios And Universal Raid Utility - NEC Express5800 Series Maintenance Manual

Chapter 2 Useful Features
5.

RAID System Configuration

5.1
WebBIOS and Universal RAID Utility
The Universal RAID Utility is used to configure, manage, and monitor the RAID System.
(1)
Terms
Some terms are different between WebBIOS and Universal RAID Utility. When using Universal RAID Utility
together with WebBIOS, replace the terms as shown in the table below:
Terms of WebBIOS
Adapter
Virtual Drive
Drive group
Drive
(2)
Numbering
Numbers indicating RAID Controller configuration differ between WebBIOS and Universal RAID Utility as shown
in the table below.
Refer to "Universal RAID Utility User's Guide" for details.
Adapter (RAID Controller)
Virtual Drive (Logical Drive)
Drive group (Disk Array)
Drive (Physical Device)
100
RAID Controller
Logical Drive
Disk Array
Physical Device
Tips raidcmd is a command provided by Universal RAID Utility. For details, refer to
"Universal RAID Utility User's Guide".
Item
Starts from 0
Starts from 0
Starts from 0
Starts from 0
Express5800/E120e-M Maintenance Guide
Terms of Universal RAID Utility
RAID Viewer raidcmd
RAID Controller
Logical Drive
Disk Array
Physical Device
Numbering
WebBIOS Universal RAID Utility
Starts from 1
Starts from 1
Starts from 1
To be assigned based
on an enclosure that
contains the physical
device and its slot
number.
5. RAID System Configuration