NEC Express5800 User Manual page 160

5-44 Installing the Operating System with Express Setup
19.
Read the contents carefully and click [Yes] if you do agree. If you do not agree, click
[No].
IMPORTANT:
If you do not agree to this agreement, the setup terminates and
Windows Server 2003 will not be installed.
If "NetWare Gateway (and Client) Service" is specified to install,
the window to specify the details of "NetWare Gateway (and
Client) Service" pops up on the first logon. Specify the appropriate
value.
When the following message is displayed, click [OK] and input the
product key.
The setup script file does not contain a valid Product ID.
Contact your system administrator for a valid Product ID.
20.
If you selected [Install the Service Pack] at [Specify Medium Partition] step, follow the
procedure below.
1) Follow the message to take Windows Server 2003 CD-ROM out of the optical disk
drive.
2) Follow the message to insert Windows Server 2003 Service Pack 2 into the optical
disk drive.
IMPORTANT:
If you install Windows Server 2003 R2, do not apply Service Pack
by Express Setup. If you install Service Pack, apply Windows
Server 2003 R2 DISC 2 after Express Setup completion, and then
install Service Pack by "Updating the system".
If you install Windows CD-ROM that contains Service Pack 2 to
your system, you do not have to apply Service Pack 2 again.
Windows Server 2003 and selected applications will be installed automatically and
rebooted several times.
After rebooting, it logs on to the system automatically.
21.
If you install Microsoft Windows Server 2003 R2, insert Microsoft Windows Server 2003
R2 Standard Edition DISC 2 into the optical disk drive after the OS installation.
Hereinafter, proceed operations according to the message.
When the installation has finished, remove Microsoft Windows Server 2003 R2 Standard Edition
DISC 2 from the optical disk drive, and restart the system.
Now the Setup using Express Setup has completed.