Special Operation (Epl-6200L); Eeprom Initialization - Epson EPL-6200 Service Manual

EPSON EPL-6200/EPL-6200L
When you replace the Developer Cartridge (toner cartridge), the pop-up
message of the EPSON Status Monitor disappears.
(The toner counter reset can be executed even if you do not replace the
Developer Cartridge.)
Worn Photoconductor
Description
Photoconductor life is 5% or less.
Remedy
Clicking the [Close] button once closes the pop-up display of the EPSON
Status Monitor. However, it will be displayed again if the warning is still
remain after changing another status.
Replace the Photoconductor Unit and reset the counter by printer driver. As a
result, the pop-up message of the EPSON Status Monitor disappears. (The
Photoconductor reset can be executed even if you do not replace the
Photoconductor Unit.)
NonGenuineTonerCart
Description
Installed Developer Cartridge (toner cartridge) is not EPSON genuine.
Remedy
Open the cover, set the correct Developer Cartridge (toner cartridge) and
close the cover again to clear the error. The pop-up display of the EPSON
Status Monitor disappears after error recovery.
However, it will be displayed again if the warning is still remain after
changing another status.
Product Description

1.6.4 Special Operation (EPL-6200L)

This section describes the special operation functions of EPL-6200L.
This function, a hidden function, must not be opened to users.

1.6.4.1 EEPROM Initialization

The setting values in the printer are cleared. The following items are initialized:
Total Pages
Jam Count
Genuine Toner Change
Toner Life counter (CSIC)
Photoreceptor Life counter
USB ID
Registration position (paper feed direction)
Non Genuine Toner Change
After EEPROM initialization, input the USB ID and make the
registration adjustment.
For details, refer to
Control Panel (EPL-6200L)
"5.3 Feed Registration Adjustment (p.169)".
Revision A
54