Usb Communication By Mtp - Denso BHT-904B User Manual

5.2.2

USB communication by MTP

1.
Set the BHT USB connection mode to MTP. For details, refer to "4.5.10 USB Communication
settings.
2.
Set the BHT MPT communication protocol options.
communication settings".
3.
Connect the host computer to the BHT using a USB cable.
4.
The BHT is recognized as a portable device (device name "Handy Terminal").
The BHT is now available to control files using the windows explorer function.
MTP can be used while running applications.
MTP can also be used with "SYSTEM MENU", "DOWNLOAD MENU",
and "UPLOAD MENU" in SYSTEM MODE.
MTP starts when advancing to "DOWNLOAD MENU", and "UPLOAD
MENU" with USB connected it.
 Attention 
The host computer must be installed "Windows XP SP2 or later" and "Windows Media Player

version 11 or later".
If the BHT is recognized as an imaging device, delete the "Handy Terminal" from the windows

device manager, and then unplug and plug the USB cable.
 Point 
Check the COM number using the device manager, etc. Even though our products have been

used and the BHT is connected to the same port, the COM port number may be different.
It may happen that communication is impossible, depending on the destination or cable.

Connect the BHT to the USB port on the main body of the host computer.

If a connection is made via the hub, proper communication may not occur.

 Do not unplug and plug in the USB cable repeatedly in a short period of time. Doing so may result
in the host computer being locked.
Barcode Handy Terminal
For details, refer to "4.5.10 USB
- M T P -
T e r m i n a t i o n K e y :
[ B S / C ] o r [ C ]
151