Denso BHT-904B User Manual page 83

 "2: OPEN BAR SETTINGS": Setting for the "function in which the reading setting is
specified from the system setting"
1.
S lect "2: OPEN BAR SETTINGS" at the SET e
an d then press the ENT key.
The OPEN BAR SETTING menu screen appears.
"1: READ MODE":
Goes to the SET READ MOD
"2 : BUZZER/LED":
Goes to the SET BUZZER/LED screen.
"3: READ CODE":
Goes to the SET BARCODE screen.
For details of the items above, refer to the following sect
2.
U se the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) to select the desired item and then
pr ess the ENT key .
3.
Pr ess the Backspace/c ar key to return to th
[1] Read mode
1.
Select "1: READ MODE" at the OPEN BAR SETTING m
then press the ENT key.
T he SET READ MODE screen appears.
The highligh ted setting is the current setting.
"1: AU TO OFF":
When the specified time elapses after the trigger operation ends, the
light goes off.
"2: MOMENTARY":
The light is illuminated continuously when the trigger switch is pressed and held.
"3: ALTERNATE":
The light brinks (turns ON/OFF) when the trigger switch is pressed.
"4: CONTINUOUS":
The light is on continuously.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4]) to select the desired setting.
3.
Press the ENT or Backspace/clear key to update the setting and return to the OPEN BAR
SETTING screen.
Read mode
E screen.
Buzzer/LED control
Read barcode
le
Auto off mode
Momentary mode
Alternate mode
Continuous-illumination mode
Barcode Handy Terminal
BARCODE menu
ions.
e SET BARCODE menu.
enu and
69