Denso BHT-904B User Manual page 66

BHT-904B/BHT-914B
When communication is complete, the CLONE MENU (screen 1) reappears.
In the event of a communication error, screen 2 appears.
List of possible errors when cloning
Processing
Phase
BHT models are different.
OS update is not possible
Immediately
(when the HT-HT copy
After Clone Start
mode designation
initialization are required).
Number
exceeded.
Memory
exceeded.
OS setting is not possible
When Clone is
(No items/Outside value
Complete
range).
During
Communication error
Communication
52
Screen 1: Error occurrence
Outline Displayed Message
Different
master side (slave side).
Continue?
OS cannot be updated.
and
Cloning will be stopped.
Too many files.
of files are
Cloning will be stopped.
Insufficient memory on
capacity is
slave side.
Cloning will be stopped.
Some items could not be
set on slave side. (N
items)
Out of memory
File mismatch
Too many files
File error
Program file error
Communication error
Screen 2: Error/Correctly completed
Detail
model on Different model
master side (slave side).
Continue?
OS cannot be updated.
Cloning will be stopped.
Too many files.
Cloning will be stopped.
Insufficient memory on
slave side.
Cloning will be stopped.
Some items could not be
set on slave side. (N
items)
Out of memory
File mismatch
Too many files
File error
Program file error
Communication error
Operations followed by an error
When screen 1 appears, select
YES/NO.
on
Y: Processing continues. (the
OS and OS settings will not
be copied.)
N: Processing is suspended.
Screen 2 appears; processing
is suspended.
Screen 2 appears; processing
is complete.