Denso BHT-904B User Manual page 126

BHT-904B/BHT-914B
 USB conne
ction test
1.
Have a USB cable ready and then connect the BHT to the ho
2.
Select "2: CONNECTOR" at the
D uring test, the screen on the right is displayed and the USB connection
te st is carried out.
P ress the Backspace/clear key to abort the test and return to the TEST
C OMMUNICATION menu.
If no connection is
and the screen on
Pre ss the Backspac
me nu.
If the connection is mad
right then appears.
Press the Backspace/clear key to return to the TEST COMMUNICATION
menu.
112
TEST COMMUNICATION screen an
made within 15 seconds, a buzzer sounds three time
the right then appears.
e/clear key to return to the TEST COMMUNICATION
e, a buzzer sounds once and the screen on the
st.
d then press the ENT key.
s