Denso BHT-904B User Manual page 157


When the Displayed File Name Differs from the BHT System Up
If the name of the file displayed at [2: FILENAME] differs from the na
be used for updating the system, enter the correct f
1.
Use the cursor keys ([▲] [▼]) or numeric key ([2]) to highlight [2: F
the ENT key.
The mode changes to entry mode and the cursor displays.
2.
Use the numeric keys and dot key to enter the cor
P ress the SF key to change the entry mode (numeric entry (no guidance display) and
To delete a single character, press the Backspace/clear key.
Backspace/clear key or press the SF and Backspace/clear keys s
3.
P ress the ENT key to set the entered file name.

If the System Update File Does not Exist when Upda
The screen displays as shown on the right if the system update file does
not exist when updating the BHT system.
Download the BHT system update file and update the BHT
Press the Backspace/clear key to return to th
Barcode Handy Terminal
me of the BHT system update file to
ile name.
rect file name.
To delete the entire entry, press and hold the
imultaneously.
ting the BHT System
system again.
e MODIFY MENU.
date File
ILENAME] and then press
alphabet entry).
143