Replacing The Battery - Denso BHT-904B User Manual

BHT-904B/BHT-914B

6.1 Replacing the Battery

Batteries are not included in the package. Have the battery specified by DENSO WAVE ready.
Specified battery: AA alkaline battery (LR6) or AA rechargeable battery eneloop
Note 1: Use rechargeable batteries already charged.
®
Note 2: eneloop is a registered trademark of SANYO Electric Co., Ltd.
Note 3: If rechargeable batteries other than eneloop
6.1.1 Replacing the Battery
1.
Press the power key (
The screen displays as shown on the right.
 Point  Do not remove the battery until the power
turns
disappears.
2.
Slide the battery cover lock in the direction indicated
by the arrow (1), remove the battery cover (2), and
then remove the battery (3).
3.
Make sure to use the battery selector switch to select
the desired battery type.
To ensure correct operation of the battery
 Point 
power level indicator and the charging
function, make sure to select the desired
battery type with the battery selector switch.
158
®
are used, the BHT unit may not operate properly.
) to turn OFF the BHT power.
OFF and the screen
®
(HR-3UTGA)
display
Using alkaline batteries
Using rechargeable batteries
LR6/Ni-MH,AA
Alkaline Ni-MH
LR6/Ni-MH,AA
LR6/Ni-MH,AA
Alkaline Ni-MH
LR6/Ni-MH,AA