Software Configuration - Denso BHT-904B User Manual

BHT-904B/BHT-914B
1.1.2

Software Configuration

This section describes the software used for BHT Series application development and application in
addition to the software used at the BHT unit.
Please note that the above-mentioned software can be downloaded (Certain versions may be for trial
use.) from the QBNet service discussed at "Customer Registration" on page ii.
[1] Application Development Procedure
The procedure for BHT Series program development is as follows.
Program creation
Program generation (compiling and linking)
Program download
Program execution and debugging
[2] Software Used for Application
 BHT-BASIC Programmer's Manual for BHT-900 Series
This is an instruction manual used to create handy terminal programs with BHT-BASIC.
 BHT-BASIC 4.0 Development Pack (option)
This is a package containing two software products required for BHT-900 Series application development
and accessories.
The BHT-BASIC 4.0 Development Pack contains the following products.
 BHT-BASIC 4.0 Compiler
Compiles and links a source program written in BHT-BASIC 4.0 to create a user program executable on
the BHT (*.PD4).
 BHT-BASIC4.0 Transfer Utility
BHT-BASIC 4.0 specification files such as application programs and data files are transferred using
YMODEM protocol.
 BHT-BASIC4.0 Transfer Utility (Option)
This is the same BHT-BASIC 4.0 Transfer Utility that comes bundled with the BHT-BASIC 4.0
Development Pack.
4