Denso BHT-904B User Manual page 138

BHT-904B/BHT-914B
[2] Uploading by FTP
1.
Select "2: UPLOAD" at the FTP MENU and then press
The screen displays as shown on the right if uploadable files exist.
[1: DIR/FILE]:
Entry box for the directory and/or file name
[2: SELECT FILE]:
File name currently selected (Nothing is displayed at the FTP client
initial status.)
A message indicating the status displays at the bottom of the screen
Press the M2 key to display the screen on the right.
[SERVER IP]:
[CURRENT DI
Press the M1 key to return to the previous screen.
2.
U se the cursor keys ([▲] [▼]) to highlight the item to be set, and then press the ENT key.

When "1: DIR/FILE" is Selected
The mode changes to entry mode and the cursor displays, allowing directory and file names to be entered
using the numeric keys and dot key.
Press the SF key to change the entry mode (numeric entry (no guidance display) and alphabet entry).
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold the
Backspace/clear key or press the SF and Backspace/clear keys simultaneously
 When "2: SELECT FILE" is Selected
The screen displays as shown on the right.
Use the cursor keys ([▲] [▼]) to highlight the upload file and then press
the ENT key.
Return to the previous screen to display the selected file name in
[2: FIELDS].
124
Set IP address
RECTORY]: Acquired current directory
the ENT key.
.