Denso BHT-904B User Manual page 81

[4] Setting the special barcode reading parameters
Use the following procedure to set the barcode reading conditions.
1.
Select "4: BARCODE" at the SET SYSTEM menu and th
t he ENT key.
The SET BARCODE menu screen
The highlighted display and displa
"1: DECODE SETTINGS":
Goes to the screen on which the barcode reading parameters are set.
"2: OPEN BAR SETTINGS":
Goes to the screen on which th
setting" is set.
2.
Use the cursor keys ([▲] [▼])
press the ENT key.
Press the Backspace/clear key to
 "1: DECODE SETTINGS": Setti
number of barcode digits to be read
Use the following procedure to set
1.
U se the cursor key s ([▲] [▼]) o
to highlight the desired item.
2.
Change the settings with the cu
the ENT key.
Press the Backspace/clear key to return to the SET SYSTEM menu.
 "1: INVERT": Black/white inverted barcode reading function
Enables or disables black/white inverted barcode reading.
"ON": Enables black/w
"OFF": Disables black/w
When th
 Point 
black/white inverted barcodes. However, there is a high
incorrectly scanned.
This should normally be set to "OFF" (black/white
displays as shown on the right.
yed values will be the current settings.
e "f nc ion in which the read u t
or n meric keys ([1] [2]) u
retur to the SET SYSTEM menu. n
ng for barcode readin
the barcode reading conditions.
r numeric keys ([1] [2] [3] [4] [5] [6])
rsor keys ([◄] [►]) and then press
hite inverted barcode reading.
hite inverted barcode reading.
e black/white inverted barcode reading function is s
Barcode Handy Terminal
en press
ing setting is specified from the system
to highlight the desired item and then
g cond itions and minimum
et to ON, it is possible to scan
er chance of barcodes being
invert ed barcode reading disabled).
67