Copying Files Between 2 Bht Units; Downloading/Uploading The Bht System Parameter File - Denso BHT-904B User Manual

BHT-904B/BHT-914B

4.5.5 Copying Files between 2 BHT Units

Copy "all files (excluding font files)", "setting data", and the "date and time" s
another BHT.
Use the following procedure to copy files between 2 BHT units.
1.
S et the same interface at both BHT units.
An IrDA c ommunication (Optical) interface is used.
The default interface is set to infrared communication (Optical).
2.
Set "COMMUNICATION PROTOCOL OPTION
field) to "Ignore" at both BHT units.
The default setting is "
Refer to "4.5.6 [5] System Environment Settings (SET SYSTEM Menu)" when chang
3.
Place the IrDA communication ports
4.
Select "2: DOWNLOAD" → "2: HT<-->HT COPY" at the SYSTEM MENU of t
downloading to await downloading.
Refer to "4.5.3 Downloading Files (DOWNLOAD Menu)" for details.
When copying only the system parameter file, use the SYSTEM PARAME
"4.5.12 Downloading/Uploading the BHT System Parameter File (SYST
d etails .
5.
S elect "3: UPLOAD" → "3: HT<-->HT COPY" at the SYSTEM MENU of the BHT that is
uploading to await uploading.
Refer to the "4.5.4 Uploading Files (UPLOAD Menu)" for details.
W hen copying only the system parameter file, use the SYSTEM PARAMETER transfer menu. Refer to
"4 .5.12 Downloading/Uploading the BHT System Parameter File (SYSTEM PARAMETER Menu)" for
details.
6.
P reparation at both BHT units is now complete and file copying will be commenced.
60
Ignore".
of the BHTs face-to-face.
tored in the BHT user area to
" → "FIELD SPACE" (spac
TER transfer menu. Refer to
EM PARAMETER Menu)" for
e at the end of the
ing the interface.
he BHT that is