Denso BHT-904B User Manual page 99

Select "1: Ymodem" at the PROTOCOL TYPE menu to display the screen
on the right.
The highlighted settings will be the current settings.
"1: CR/LF":
Specifies line delimiters.
"2: CR/LF CODE":
Specifies handling for line delimiters in records when data files are do
"Control c ode":
Does not handle line-break codes as data. (Handles as record delimiters.)
"Data":
Handles line-break codes as data.
"3 : BHT ID":
Specifies whether o r not to add the BHT ID number to packets when performing Ymodem transfer.
"None" should normally be selected.
To add the BHT ID number to the transfer tool, select "Add".
this setting has no result.)
"4 : INTERVAL":
Specifies the retry interval within a range of 1 to 255 in units of 100 ms.
To make changes, use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4])
se t, highlight the setting value using the cursor keys ([◄] [►]), and then press the ENT key.
For "4: INTERVAL", press the ENT key to change to entry mode.
The cursor displays, allowing the previous setting to be deleted by pressing the Ba
Enter a new setting values with the numeric keys and press the ENT key.
Press the Backspace/clear key to return to the SET COMMUNICATION men u.
Barcode Handy Terminal
wnloaded.
(This setting is not supported. Changing
to highlight the item to be
ckspace/clear key.
85