Denso BHT-904B User Manual page 110

BHT-904B/BHT-914B
[8] Setting the user prog ram execution option
Use the following procedure to set the user program execution option.
1.
Select "1: EXEC PROG OPTION" at the SET SYSTEM 2/2 menu
and then press the ENT key.
The EXEC PROG OPTION screen
The highlighted settings are the current settings.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to change
the setting and then press the ENT key.
Press the Backspace/clear key to return to the SET SYSTEM menu.
"1 : RESUME":
"ON": Enables the re
"OFF": Disables the resume function.
"2: RESTART
Sets the p resence of the confirmation
For the function where the auto-start execution program is re-launched, refer to "4.3.6 Executing the
Auto-start Exe
"ON": The confirmation screen is displayed.
"OFF": The confirmation screen is not displayed
The resume function is used to return the BHT to the status (screen) when the BHT power
 Note 
was turned OFF previously.
96
appears.
sume function.
DIALOG":
cution Program from the Point of Start-up".
screen when the auto-start execution program is re-launched.
.