Denso BHT-904B User Manual page 143

Use the following procedure to set the USB communication settings.
[1] USB MENU
1.
Select "1: USB" in the
The USB menu is displayed as shown on the right.
2.
Use the cursor keys ([◄] [►]) to select the connect mode.
Pres s the Backspace/clear key to
"1: USB CONNECT MODE":
Setting the USB connection mode.
The highlighted settings are the current settings.
Use the cursor key ([◄] [►]) to change the settin s. s
[MT P]:
[COM]:
Co ntin ue in the foll
 Point 
Fo r the
[2] MTP SETT ING men u
1.
Select "MTP" in the USB MENU and
The MTP SETTING menu is displayed as shown on the right.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) to
select the menu.
Press the Backspace/clear key to return to the USB MENU.
[1:MTP RESTRICTIONS]:
[2:MTP FILE SETTING]:
[3:MTP DISP FILTER]:
Refer to the following sections for each of the above menus.
DEV ICE menu and then press the ENT k
return to the DEV
Connects in th e MTP mode.
Connects in th e COM mode.
owing section for th
COM mo de settings, refer to "4
then pres
Displays the MTP RESTRICTIONS screen
Displays the MTP FILE SETTING screen
Displays the MTP DISP FILTER screen
Barcode Handy Terminal
ey.
ICE MENU.
g
e MTP mode settings.
.5.6 [5] System Environmen
s the EN T key.
1:MTP RESTRICTIONS
2:MTP FILE SETTING
3:MTP DISP FILTER
USB MENU
1:SET CONNECT MODE
MTP COM
[ENT]DETAIL
t Settings".
MTP SETTING
129