Denso BHT-904B User Manual page 64

BHT-904B/BHT-914B
2.
Execute the master-side setup.
Setup is performed with the BHT Setting and other SYSTEM MENU functions.
3.
Perform the settings for the master-side clone using "2: CLONE" and "3: OPTION" from the
SETUP menu.
Use the option menu to perform settings such as the clone number and authentication key.
The option menu contains the following items.
Item
1: CLONE NO.
Clone number
2: SOFTWAVE TO
CLONE
Software to clone
3: AUTH KEY
Clone authentication
key
4: SLAVE ACTION
Post-slave completion
operation
5: FILE COPY MODE
Clone mode
4.
Select "1: MASTER" from the master-side CLONE MENU.
50
Setting Content
1 to 6-digit numeric values
OS
0 to 16 one-byte
alphanumeric characters
to be used
(Entry possible in ALP
mode)
Not in use
Clone menu
BHT reboot
Clone mode
Makes the save-side file
structure identical to the
master-side structure.
HT-HT copy mode
Leaves the slave-side
files.
Default
Specifies whether or not a "0" is placed at
the beginning of a number so that not only
sequential numbers can be used, but
"0"
dates as well.
e.g.,: The function differentiates between
"1" and "000001".
There are also OS settings and additional
files. These are always cloned.
YES
Not in use
BHT reboot: Restarts the BHT and then
activates the application.
Clone menu
Clone mode
Remarks