Denso BHT-904B User Manual page 129

Upon completion of the PING test, the screen displays as shown on the
right.
The PING result may include the following:
OK: Displays the number of echo replies.
[X XXXX]: Echo reply time in milliseconds.
NG: Displays the number of errors fo
TIMEOUT: Displays the number of timeouts (for echo replies) that to
IP: Displays the BHT IP address during the PING test o
Messages displayed during PING test (displayed in cente
Waiting: Setting up the PING test.
Opening device: Opening devices.
Routing TCP/IP: Connecting to the TC
PING start: Starting the PING tes
Device error: Failed to open a device.
TCP/IP error: Failed to connect to the TCP/IP communication pathway.
PING termination messages (displayed at bottom of screen)
PING end: The PING test has ended normally.
PING aborted: The PING test has been aborted.
PING error: An error
und during the PING test.
P/IP communication pathway.
t.
has occurred during the PING test.
Barcode Handy Terminal
ok pl ace during the PING test.
nly.
r of screen)
115