Denso BHT-904B User Manual page 128

Barcode handy terminal
Table of Contents

Advertisement

BHT-904B/BHT-914B
[9] PING test
Use the following procedure to run the PING test.
1.
Select "9: PING" at the TEST menu and then press the ENT key.
The TEST PING screen displays as shown on the right.
"1: RUN
PING":
"2: SET PING":
"3: SET DEVIC
Refer to the following section for details of the above items.
Press the Backspace/clear key to return to the TEST menu.
 "1: RUN PING" (PING Tes
1.
Select "1: RUN PING" at the TEST PING menu and then press the
ENT key.
The current setting values display, and the BHT waits for the transmission
count to
be entered.
To change the number of echo requests displayed
v
alue using the numeric keys.
T
o delete a single character, press the Backspace/clear key. To delete
the entire entry, press and hold the Backspace/clear key or press the
simultaneously.
2.
Press the ENT key.
When the PING test starts running, the message shown displays as
shown on the right.
Press the Backspace/clear key to abort the PING test.
114
Runs the PING test.
Displays the PING parameter setting screen.
E":
Displays the PING device setting screen.
t Screen)
, enter the desired
SF and Backspace/clear keys

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bht-914b

Table of Contents