(System Parameter Menu) - Denso BHT-904B User Manual

4 .5.13 Downloading/Uploading the BHT System P
(SYSTEM P
The system parameter file (file name: "_BHT.SYS") is a file containing
contrast and beeper volume set at section "4.5.6 System Environmen
T he same settings can be set at another BHT by copying the system pa
Copying the System Parameter File
(1) Upload the system parameter file to the hos
(2) Download the uploaded system parameter fi
The system parameter file can also be copied directly b
 Supplement
their respective UPLOAD and DOWNLOAD
Refer to section "4.5.5 Copying Files between 2 BH

U ploading the System Parameter File
C reate a system parameter file based on the current setting values and upload it to the host computer and
s o on. After uploading, delete the created system parameter file.

D ownloading the System Parameter File
R eceive the system parameter file from the host computer and so on to which it was backed up, and after
s etting the stored values, delete the received system parameter file.
The communication parameters, communication protocol, and interface set at "[5] Setting the
communication environment" in section "4.5.6 System Environment Settings" are used when uploading
and downloading.
Use the following procedure to download and upload the system parameter file.
1.
Press the [3] key while holding down the SF key at the SYSTEM
MENU.
The SYSTEM PARAMETER menu screen displays as shown on the
right.
[1: DOWNLOAD]:
Downloads the BHT system parameter file to the BHT user area.
[2: UPLOAD]:
Uploads the BHT system parameter file stored in the BHT.
Refer to the following section for details of the above items.
Press the Backspace/clear key to return to the SYSTEM MENU.
ARAMETER Menu)
t computer and so on.
le at another BHT.
Barcode Handy Terminal
arameter File
settings such as values, LCD
t Settings".
rameter file to that BHT.
etw een two BHT units by opening
menus.
T Unit s" for details of the copy method.
135