Chapter 2 Bluetooth ® Wireless Communication - Denso GT20Q-SB User Manual

Chapter 2 Bluetooth
See Appendix 3 for terms regarding Bluetooth
2.1 Enabling Bluetooth
When using the scanner for the first time, read the "Setting commencement" and "Start operation" QR codes
following the procedure in
This procedure enables the Bluetooth
Note: In hospitals, airplanes, and other locations where there is a possibility that Bluetooth
2483.5 MHz, 2.5 mW max.) may have an effect, disable the Bluetooth
scanner.
To disable the Bluetooth
Section 13.2 following the procedure in
Note: When in the default factory setting or "End operation" has been set, the scanner cannot read codes other than the
"Start operation" QR code, the batch setting QR Code, or the barcode on the back of the communications
adapter. Reading the "Start operation" QR code in
®
the Bluetooth
®
wireless communication
®
wireless communication.
®
wireless communication
Section 13.1. If the scanner has been set to "End operation", read the "Start operation" QR code.
®
wireless communication function.
®
wireless communication function of this scanner, read the "End operation" QR code in
wireless communication function.
Section 13.1.
Section 13.2 following the procedure in
2
®
radio waves (2400 MHz -
®
wireless communication function of this
Section 13.1
(Section 13.2)
enables