Uploading Files (Upload Menu) - Denso BHT-904B User Manual

Barcode handy terminal
Table of Contents

Advertisement

4.5.4 Uploading Files (UPLOAD Menu)

Upload files stored in the BHT user area to another device.
Use the following procedure to upload files.
Uploading files by MTP via a USB communication port is
 Note 
also available.
Refer to "5.2.2 MTP Communication"
1.
S
elect "3: UPLOAD" at the SYSTEM MENU and then press the
ENT key.
The screen display as shown on the right.
"1
: ONE FILE
":
Select to uplo
ad a specific file.
"2
: ALL FILE
S":
Select to uplo
ad all files, excluding font files.
"3
: HT<-->HT
COPY":
Select to uplo
ad a file to another BHT.
Refer to "4.5.5 Copying Files betwe
P
ress the Bac
kspace/clear
T
he current c
ommunication settings display
Communicatio
n protocol type
Interface used
Transmit speed
Refer to "4.5.6 System Environment Settings (SET SYSTEM Menu)" for details of communication
environment settings.
If BHT protocol or BHT-Ir protocol is selected for the communication protocol, BHT-BASIC 4.0*
 Point 
specification files will not display at the file selection screen, and therefore cannot be
downloaded.
(*Applications with extension ".PD4", extension libraries with extension ".FN4", and data files
that have any of the following structures: the number of fields is 17 or more, the total of the
number of fields and each field length is 255 or more, and the number of records is 32768 or
more)
en 2 BHT Units" for details.
key to return to the SYSTEM MENU.
at the bottom of the screen.
Ymodem
Ymodem protocol
BHT-Ir
BHT-Ir protocol
BHTp
BHT protocol
Opt
Infrared interface
Con
USB interface
9600 to 460800
Transmission speed corresponding to each protocol
Barcode Handy Terminal
- M T P -
T e r m i n a t i o n K e y :
[ B S / C ] o r [ C ]
Transmit speed
Interface used
Communication protocol type
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bht-914b

Table of Contents