Denso BHT-904B User Manual page 91

2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to select the desired item.
3.
Press the cursor keys ([◄] [►]) to select the desired setting.
4.
Press the or Backspace/clear key to update the
ENT
m enu.
"6 : CODE128 ": Detail setting of the Code 128 reading
1.
Sele ct "6: CODE12 " at the
The SET ODE128 screen appears. C
"1 : MIN":
Sets the minim um number of the Code 128 digits.
S etting ra ng e:
"2: MAX":
Sets the ma ximum number of the Code 128 digits.
Setting range:
Always set the minimum number of digits to a number less than the maximum number o
 Point 
digits. If the minimum number exceeds the maximum n
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to select the desired item.
3.
Press the cursor keys ([◄] [►]) to select the desired setting.
4.
Press the ENT or Backspace/clear key to update
menu.
"7 : RSS": Detail setting of the RSS (G
1.
Select "7: R SS" at the SET BARCODE menu and then press the
The SET RSS screen appears.
(RSS-14, R SS-14 Truncated setting)
"1 : READING":
Enables or d isa
O mnidirectional) or RSS-14 Truncated (GS1 Databar Truncated).
"2: Stack d": e
Enable s or disables reading of the RSS-14 Stacked (GS1 Databar
Stacked) or RSS-14 Stacked Omnidirectional (GS1 Databar Stacked
Omnidirectional).
 Point  To enable reading of the Stacked type barcode, it is necessary to set both "1: READING"
and "2: Stacked" to ON.
8 SET BARCODE menu and then press the ENT key.
1 to 99
1 to 99
S1 Databar) reading
bles re ading of the RSS-14 (GS1 Databar
Barcode Handy Terminal
setting and return to the SET BARCODE
umber, a read error occurs.
the setting and return to the SET BARCODE
key.
ENT
f
77