Downloading Files (Download Menu) - Denso BHT-904B User Manual

BHT-904B/BHT-914B

4.5.3 Downloading Files (DOWNLOAD Menu)

Download files to the BHT user area from other devices such as the host computer.
 Point 


Downloading files by MTP via a USB communication
 Note 
port is also available.
Refer to "5.2.2 MTP Communication"
Use the following pr
1.
Select "2: DOWNLOAD" at the SYSTEM MENU and then pre
the ENT key.
The screen displays as shown on the righ
"1: FILE":
Select to download a specific file.
"2 : HT<-->HT COPY":
Select to download a file from another BHT.
Refer to "4.5.5 Copying Files between 2 BHT Units" for details.
P ress the Backspace/clear key to return to the SYSTEM MENU.
T he current communication settings display at the bottom of the screen.
Communication protocol type
Interface used
Transmit speed
Refer to "4.5.6 [5] Setting the communication environment (SET SYSTEM Menu)" for details of
communication environment settings.
54
If a file with the same name as one already used in the user area of the target memory in
the BHT is downloaded, the newly downloaded file replaces
If an auto-st art execution program has not been spec
auto-start ex ecution program), the directory management program will e
managed program from amo
BHT power is turned ON. (Program displayed at
menu). Take this into account when determining th
Refer to "4.3 Executing User Programs" for details.
ocedure to download files.
Ymodem
BHT-Ir
BHTp
Opt
Con
9600 to 460800
ng the programs (.PD4) dow
the to
e file
ss
t.
Ymodem protocol
BHT-Ir protocol
BHT protocol
Infrared interface
USB interface
Transmission speed corresponding to each protocol
the old one.
ified (See 4.5.6 [1] Setting the
xecute the first
nloaded to the BHT when the
p of the "EXECUTE PROGRAM"
download order.
- M T P -
T e r m i n a t i o n K e y :
[ B S / C ] o r [ C ]
Transmit speed
Interface used
Communication protocol type