Adjusting The System Volume; Adjusting The Ringing Volume - RADVision SCOPIA XT4000 Series User Manual

Adjusting the System Volume

When in a meeting, press
hear at your site.
To change the default speaker volume, perform the procedure in this section.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5

Adjusting the Ringing Volume

When not in a meeting, you can set the ringing tone of the incoming call to a comfortable
hearing level.
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0
•
Adjusting the System Volume ............................................................. page 43
•
Adjusting the Ringing Volume ............................................................. page 43
•
Muting the Microphone Pod ............................................................... page 44
Access the SCOPIA XT Series web interface.
Select the User settings tab.
Select General under Call-Answer mode.
Drag the Volume slider to set the value.
Select Save.
+ or - on the XT Remote Control Unit to adjust the sound you
Figure 7-9 Call-Answer settings
Managing Calls and Videoconferences | 43