Setting The Monitor Resolution - RADVision SCOPIA XT4000 Series User Manual

Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Setting the Monitor Resolution

The rear panel of the XT Codec Unit features 2 HD outputs for connecting a main and auxiliary
screen. For cabling, see the cabling diagram in the Quick Setup Guide.
Your system administrator must configure the system for correct video resolution.
When you are not in a call, you can set the refresh frequency of the monitor display:
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0
Access the SCOPIA XT Series web interface.
Select the User Settings tab.
Select General under User preferences.
Figure 4-5
Select Auto from the Local presentation mode list.
Set Show warnings to Yes if you want the system to display a warning when the local
presentation mode is activated.
Set the required setting in the Keep presentation aspect ratio list:
• Yes—to keep the original presentation ratio.
• No—to display the presentation in 4:3 format so that it fills all the monitor.
•
Set to 50 Hz by pressing
•
Set to 60 Hz by pressing
The user preference settings
then 5.
then 6.
Tailoring Your User Experience | 24