Selecting The Computer Display Resolution - RADVision SCOPIA XT4000 Series User Manual

Selecting the Computer Display Resolution

Configure the computer display to one of the supported picture resolutions and refresh
frequencies.
Please notice the following system behavior when selecting the display resolution:
Procedure
Step 1
Step 2
Step 3
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0
•
Since audio input is not included in the DVI-I port to XT Codec Unit connection, establish
a separate audio connection from the computer's audio output port into the optical audio
input port of the XT Codec Unit.
•
You can also use an external analog-to-digital converter if necessary.
•
If you connect a camera to the DVI-I input, the system manages it as PC content.
•
When using XGA adapters, the system supports only 60Hz for 720p and 1080p formats.
•
In this software version, presentation is transmitted at 1080p only when DVI-D 1080p input
resolution is used.
Right-click on your computer desktop. The Display Properties page appears.
Select Settings.
Select one of the relevant resolution and refresh frequencies.
Table 5-1 Resolution and Refresh Frequencies
Name Resolution
1080p 1920x1080
900p 1600x900
WSXGA 1440x900
SXGA 1280x1024
UVGA 1280x960
WXGA 1280x768
720P 1280x720
XGA 1024x768
SVGA 800x600
VGA 640x480
Refresh Frequency (Hz)
60, 50, 30, 25
60
60
60, 75
60, 85
60
60, 50, 30, 25
60, 70, 75, 85
60, 70, 75, 85
60, 70, 75, 85
Preparing for a Video Call or Videoconference | 27