Blocking Incoming Calls; Managing The Phonebook; Adding A Contact To The Phonebook - RADVision SCOPIA XT4000 Series User Manual

Blocking Incoming Calls

You can block an incoming call using the Do Not Disturb feature if you do not want to answer.
When a remote endpoint calls and you block an incoming call, the XT Series rejects the
incoming call and the call is disconnected. The
area of the monitor display.
To block an incoming call, press and hold the Privacy
When you block an incoming call as described in this section, the system disconnects all
incoming calls until you disable the feature by pressing and holding the Privacy
You can configure the XT Series to automatically block all incoming calls, if you want this to
be the default behavior. For operational information, see
Block Incoming Calls by Default" on page

Managing the Phonebook

This section details how to manage the contact information stored in the SCOPIA XT Series:

Adding a Contact to the Phonebook

You can add a new contact to the phonebook at any time.
Procedure
Step 1
Step 2
Step 3
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0
•
Adding a Contact to the Phonebook ...................................................... page 45
•
Searching for a Contact in the Phonebook .............................................. page 47
•
Modifying a Contact in the Phonebook .................................................. page 47
•
Deleting a Contact from the Phonebook ................................................. page 48
Access the SCOPIA XT Series web interface.
Select the Make your call tab.
Select Contacts on the left.
icon appears in the system information
21.
Figure 7-11 The Contacts page
key on the XT Remote Control Unit.
"Configuring the SCOPIA XT Series to
Managing Calls and Videoconferences | 45
key again.