Accessing The Main Menu - RADVision SCOPIA XT4000 Series User Manual

Accessing the Main Menu

You access the main functions through the Main menu:
You navigate SCOPIA XT Series menus using arrow keys and pressing the OK key on the XT
Remote Control Unit.
Before you begin
Verify that the power supply of the XT Codec Unit is connected.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0
•
Call—making audio and video calls
•
Contacts—access to the phonebook
•
Present—start sharing content
•
Control camera—adjust camera position
•
Configure—perform basic configuration and check the system status
Turn on the TV monitors.
Make sure the XT Remote Control Unit has batteries installed.
Verify that the LED on the front panel of the XT Codec Unit is blinking.
Turn on the XT Codec Unit by pressing the On/Off key on the XT Remote Control Unit.
The system home page appears on the monitors.
If you access the system for the first time, the Quick Setup wizard is displayed; otherwise the
Main menu appears.
Getting Started | 8