Configuring The Scopia Xt Series To Enter The Local Presentation Mode Automatically; Automatically - RADVision SCOPIA XT4000 Series User Manual

Step 4
Step 5

Configuring the SCOPIA XT Series to Enter the Local Presentation Mode Automatically

Local presentation mode is an XT Series feature that allows to easily connect a PC laptop to
the DVI connector of the XT Codec Unit for having a presentation or any other PC content
immediately available on the monitors. When in the local presentation mode, the system does
not accept incoming calls automatically. When an incoming call is received, the local
presentation mode is suspended. The original video source and graphics are restored, and
system displays the prompt allowing you to choose how to handle the call (accept/reject/do
not disturb).
You can configure your XT Series so that it enters the local presentation mode automatically.
When configured so, the system starts presenting the moment you connect a PC to the DVI
connector on the XT Codec Unit if there is no active call.
If the PC resolution is not supported, the system suggests the maximum supported resolution
for the PC/laptop:1280x720p.
When accessing the local presentation mode, the current selection of the live camera is
saved; the video input switches to DVI and the audio settings associated to DVI are
automatically used.
You can also enter the local presentation mode manually by pressing the Presentation button
on the XT Remote Control Unit.
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0
Figure 4-4
Set Video Privacy to Yes.
Select Save.
The call-answer settings
Tailoring Your User Experience | 23