Ending A Call - RADVision SCOPIA XT4000 Series User Manual

If you set your system to automatic answering, the endpoint answers after the predefined
number of rings.
If you set your system to manual answering, you can either accept or reject the incoming call.
When there is an incoming call, the system displays a window with these options:
For information about setting the system to answering calls automatically, see
Automatic Answering" on page

Ending a Call

Procedure
Step 1
Step 2
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0
•
To accept the call, press
•
To reject the call, select the Reject option on the screen by pressing the right arrow key
and on the XT Remote Control Unit.
•
To reject the call and set the system to automatically reject all further incoming calls
without asking any more, select the Do not disturb option on the screen by pressing the
right arrow key twice and
Press on the XT Remote Control Unit.
Press to confirm, if your system is set to Confirm disconnection.
Accept or on the XT Remote Control Unit.
on the XT Remote Control Unit.
19.
"Enabling
Making Calls | 32