Assembly; Checking The Table Plate; Assembling The Frame - DURKOPP ADLER 512 Operating Instructions Manual

72

8.3 Assembly

8.3.1

Checking the table plate

CAUTION
Danger of injury from a self-manufactured table
plate of insufficient load-bearing capacity
Ensure that the table plate has sufficient load-
bearing capacity and strength.
The cutouts in self-manufactured table plates must
conform to the dimensions specified in the drawing
(see Appendix).
8.3.2

Assembling the frame

Figure 19: Assembling the frame
①
(1) – Adjusting screw
(2) – Pedal
(3) – Frame brace
Operating Manual 512/532 Version 00.0 - 12/2013
② ③
Setup