Setup
7.4 Assembling and connecting the pedal
Fig. 181: Connect the pedal
(1) - Socket
(2) - Plug
To connect the pedal:
1. Insert the plug (2) of the pedal into the socket (1) .
2. Place the grounding clip (4) around the cable and assemble in place
Setting the pedals
For convenience, the parts are only named on one side. However, the same
mapping applies on the other side of the pedal.
Information
The pedals can be set in height, angle of inclination and lateral position.
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
①
②
behind the oil can holder (3).
④
③
(3) - Oil can holder
(4) - Grounding clip
225