Setup
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
Fig. 59: Setting the working height
(1) - Screw
To set the working height:
1. Loosen the screws (1) on both stand bars.
2. To avoid jamming, slide the tabletop in or out evenly at both
sides.
The scales on the outer sides of the stand bars serve as an
adjustment aid.
3. Tighten the screw (1) on both bars of the stand.
7.6
Adjusting the pedal
NOTICE
Property damage from incorrect setting!
If done carelessly, adjusting the settings separately can
cause damage to the machine.
Always adjust the inclination and position of the pedal as a
function of one another.
①
101