7. Removal of POWER SUB C.B.A.
1. Remove the Side Case (R) Ass'y.
2. Remove the Side Case (L) Ass'y.
3. Unscrew the 2 screws (A) and remove the SHOULDER PAD as shown in figure 7-1.
SHOULDER PAD
4. Unscrew the 6 screws (B) and remove the BOTTOM COVER as shown in figure 7-2.
NOTE: Match the hole of L Side Jack and BOTTOM COVER as shown in figure 7-2, when installation.
BOTTOM COVER
5. Unscrew the 2 screws (C) and disconnect the connector (A) and (B), then remove the L SIDE JACK Ass'y as
shown in figure 7-3.
SCREW (B)
SCREW (C)
SCREW (A)
Figure 7-1
Match the hole of L Side Jack and
BOTTOM COVER, when tighten the screw.
Figure 7-2
Figure 7-3
DIS-5
CONNECTOR (A)
CONNECTOR (B)