Service Menu - Panasonic AG-HPX500 Service Manual

3. Service menu

This model has DIAGNOSTIC, ADJUST and OPTION menu as service menu besides the setup menu.
NOTE: (Only the MC model)
The menu screen described in this item "3. Service menu" is an English display. When "CHINESE" is selected by
item "LANGUAGE" of the OTHER FUNCTION screen (Setting menu), there is a portion used as a Chinese display
(The factory shipments mode is "CHINESE"). Therefore, the procedure indicated in this item is also following the
English display.
NOTE: Service menu can be displayed by PC EVR software except below indicated method. Please refer to item
"6-4-3. Display operation of a Service menu and the DIAGNOSTIC menu" (page INF-28).
< How to open the OPTION menu >
Press the "MODE CHK" button and "MENU" button simultaneously, OPTION menu can be displayed in addition to
a setup menus.
< How to open the DIAGNOSTIC and OPTION menu >
Press the button in order of "COUNTER-RESET" button → "STOP" button → "MODE CHK" button → "MENU"
button, DIAGNOSTIC and the ADJUST menu can be displayed in addition to a setup menus.
NOTE: The THUMBNAIL MENU button can be used instead of MENU button.
JOG DIAL button
MENU button
After the OPTION, DIAGNOSTIC or ADJURT menu is displayed, use the JOG dial button (or the Up and Down
cursor buttons) to select the menu. And press the JOG dial button (or the SET button) to open the selected menu.
To return the previous screen, press the MENU button (or the THUMBNAIL MENU button).
NOTE 1: PC mode can not be display the menu.
NOTE 2: Before performing menu operations on MCR mode, you must clear the thumbnail screen. If the thumbnail
menu is displayed, press the THUMBNAIL button to release the display.
MODE CHK button COUNTER-RESET button
THUMBNAIL MENU button
INF-4
THUMBNAIL button
PLAY button
(cursor: up)
SET button
STOP button
(corsor: down)