Initial Settings.61; Switching Operating Sound On Or Off.61; Setting Or Releasing Power Save.61 - Panasonic VDR-M20PP Operating Instructions Manual

Hide thumbs Also See for VDR-M20PP:
Table of Contents

Advertisement

iBfiEgBSlPl
( ISM55I 1
Initial Settings ■
= =
. =
Switching Operating Sound On or Off ;
.—
'
.- ,
This DVD video camera/recorder will emit sound when the power switch is changed over, the REC button
is pressed, or other operations are engaged, if you do not need operating sound, you can switch it off.
Press the MENU button.
The menu screen will appear.
2 Use
the
joystick
to
choose "Beep" on the
"Initial Setup" menu
screen, and then press
the ►/11 button.
The options will appear on the right of "Beep":
The □ mark will be attached to the currently se¬
lected option.
^ Use
the joystick
to
choose "On" or "Off",
and then press the ►/! I
button.
^ Press the MENU button.
The menu screen will disappear.
Note: The "Beep" setting will not change even if
the DVD video camera/recorder is turned off.
Setting or Releasing Power Save c
~
This DVD video camera/recorder is equipped with power save function. Specify "Power Save: On": If
the DVD video camera/recorder is left in the recording pause status without being operated for 5 min¬
utes, it will automatically turn off to prevent the battery from discharging needlessly.
Press the MENU button.
The menu screen will appear.
2 Use the joystick to
choose "Power Save"
on the "Initial Setup"
menu screen, and then
press the ►/11 button.
^ Use the joystick to
choose "On" or "Off",
and then press the^/ll
button.
£
Press the MENU button.
The menu screen will disapenr.
The options will appear on the right of "Power
Save": The □ mark will be attached to the cur¬
rently selected option.
Note: The power save setting information does
not appear in the on-screen display, and this set¬
ting will not change when the DVD video cam¬
era/recorder is turned off.
Note: If you want to use up the battery when you
have no intention of using the DVD video cam¬
era/recorder for a long time, specify 'Power Save:
Off'.
Note: To turn the DVD video camera/recorder on
again from automatic off activated by the power
save function, set the power switch to 'POWER
OFF", and then set it to'#iVIDEO'or'DPHOTO".
61

Advertisement

Table of Contents
loading

Table of Contents