Removal Of Cam Power C.b.a; Removal Of Power Main C.b.a - Panasonic AG-HPX500 Service Manual

5. Removal of CAM POWER C.B.A.

1. Open the Side Case (R) Ass'y.
2. Remove the Side Case (L) Ass'y.
3. Remove the P2CARD 1 and P2 CARD 2 C.B.A..
4. Disconnect a connector (A) as shown in figure 5-1.
5. Unscrew the 4 screws (A) as shown in figure 5-1.
6. Disconnect a connector (B) combined with the CAMERA C.B.A. as shown in figure 5-1, and remove the CAM
POWER C.B.A..
CONNECTOR (B)

6. Removal of POWER MAIN C.B.A.

1. Remove the Side Case (L) Ass'y.
2. Remove the POWER MAIN C.B.A. as shown in figure 6-1.
POWER MAIN C.B.A.
SCREW (A)
Figure 5-1
Figure 6-1
DIS-4
CAM POWER C.B.A.
CONNECTOR (A)