3-2-2. LCD Correction
LCD OFFSET
Use the JOG dial button (or the Up and Down cursor buttons) to select the "LCD OFFSET". And press the JOG
dial button (or the SET button).
Use the JOG dial button (or the Up and Down cursor buttons) to change the setting value.
Press the JOG dial button (or the SET button) to value is fixed.
ADJUST MENU
DEBUG MODE
LCD OFFSET
1394 GAP COUNT
CAM DEBUG MODE
DARK MODE
PUSH MENU TO RETURN
3-2-3. 1394 GAP COUNT
Setting at communication response time.
R signal output to LCD is corrected.
OFF
1: Correction level 1
OFF
OFF
2: Correction level 2
40
1
0
2
ON
INF-10