8. Select "Save Image File(S)" in "File(F)" menu.
9. Click "Send(S)" button after the file name is input, and the place that saves a file is specified on SAVE screen.
The following message is displayed when saving a file is completed.
NOTE: It is not necessary to make a file name as NTSC, PAL, and LENS. When reading a file, an address is
automatically specified with the data of a file.
10. Select "1000-1FFF[PAL]" on Device View screen shown in step 4 and save the data of "1000-1FFF[PAL]"
part follow the step 5 to 9.
11. Select "2000-2FFF[LENS]" on Device View screen shown in step 4 and save the data of "2000-2FFF[LENS]"
part follow the step 5 to 9.
INF-34