Save And Write Eeprom Data; Save Data Of Eeprom Data Of Camera-Recorder To Pc; Save Data Of Camera-Eeprom - Panasonic AG-HPX500 Service Manual

7. Save and write EEPROM data

< PREPARATION >
When EEPROM data save and write, the PC EVR software is used. Please connect the tools and set up the PC
EVR software follow the item "6. PC EVR software".

7-1. Save data of EEPROM data of Camera-Recorder to PC

7-1-1. Save data of Camera-EEPROM

There are three CAMERA EEPROM IC of this unit for NTSC, PAL and LENS data. Because the EVR software can
be save data at a time only by as many as 1 piece of IC, it is necessary to make three files.
1. This camera recorder is set to CAM mode.
2. Select "CAM(C)" section after start up the PC EVR software, and click "OK" button.
3. Select "Option" in "Setting(S)" menu and select "EEPROM : 4 byte read / write mode" on Option screen.
4. Select "0000-0FFF[NTSC]" on Device View screen as follows.
INF-32