Panasonic AG-HPX500 Service Manual page 59

< Procedure 2 >
Write the Scene file data to SD memory card.
Write the Setting menu data (USER FILE) to SD memory card.
Confirm that the CAC files saved on the camera recorder.
The files saved can be confirmed by select the item of CAC FILE DELETE on the LENS
SETUP menu. (LENS SETUP menu → CAC FILE DELETE)｡
NOTE: It is only the check of files. Please do not delete a file.
CAMERA Board is exchanged
NOTE: An abnormal screen might be displayed (In case of the SYSTEM FREQ. set to the
CODEC side and the SYSTEM FREQ. on the CAMERA side are the disagreements.).
Turn the power OFF and ON (Normal screen is displayed.).
*NOTE
Confirm that the software version.
･ CAM MICON･ CAM FPGA
･ CAMBE FPGA ･ CAM EEPROM
Be the latest version.
(Refer to Global Service WEB Site about
number of latest version.)
CAMERA Adjustment is required.
Regarding required adjustment items, refer to item "11-3-1. CAMERA Adjustment" (page INF-51).
Load the backed up Scene file data to new board.
Load the backed up Setting menu data (USER FILE) to new board.
( It continues to next page. )
Turn the power ON.
*NOTE:
The CAM MICON､CAM FPGA､CAMBE FPGA and
CAM EEPROM do not required update.
If writing is necessary, please contact Panasonic
Service Engineering.
INF-49