6-3. Setup of PC EVR software
1. Copy all files of the PC EVR software (VVS0059) for AG-HPX500 series to the PC.
2. Supply power to the Camera-Recorder and turn power ON.
3. Start up the PC EVR software by double-clicking "VVS0059.exe". The following screen will appear.
4. Select the "CAM(C)" or "SYSCON(S)" according to the purpose and click "OK" button. The following screen
will appear and when communication between the PC and the Camera-Recorder has been succeeded, blue is
displayed to the status lamp.
NOTE: VVS0059 corresponds to AG-HVX200. But, when VVS0059 is used in the CAM(C) section, it is necessary
put the check in box "previous model to HVX200".
STATUS LAMP
SYSCON section screen
5. The communication status between the PC and the Camera-Recorder can be confirmed with the status lamp
as following color.
Not Connected
:
Connected
:
Reading
:
Writing
:
black
blue
green
red
INF-25