Panasonic AG-HPX500 Service Manual page 81

7. Connect the Extension Cable (VFK1989) to connector P2 on Measuring Board (VFK1988).
Connect VFK1989 with connector P2
as shown in picture.
The unit will
connector is attached backwards.
8. Connect the Extension Cable (VFK1989) to Connection Board (VFK2027).
9. Supply DC6V-9V to the Measuring Board (VFK1988). Please use the DC cable and AC Adaptor to supply DC
voltage to Measuring Board.
10. Connect a 9 pin RS-232C cross cable between the Measuring Board and RS-232C connector on Personal
Computer as shown in Figure.
VFK2027
not work if the
P2
VFK1989
VFK1988
Figure 1-2-5
Figure 1-2-6
ELE-3
VFK1989
This cable connect to
serial port of PC.
RS232C cross cable
AC ADAPTOR