6-4-8. Factory Initialize
1. Clicking "Execute" button, it is blink displayed as "FACTORY INIT" on the LCD panel.
2. After initialization is completed, it replaces the "FACTORY INIT OK: * " display.
The mark * is indicated as shipment destination information. Please confirm that mark is corresponding to the
destination of the camera recorder.
Ex.) In case of AG-HPX500P, it displayed as "P".
NOTE: The model AG-HPX502EN is displayed as "E".
FACTORY INIT
3. Turn power off the camera recorder.
4. Factory initialize can be executed by push the button of the camera recorder. Please refer to item "10. Factory
Initialize" (page INF-42).
6-4-9. Power supply reboot
1. Clicking "Re-Boot" button, the power of camera recorder automatically OFF and ON.
FACTORY INIT OK: *
TURN POWER OFF
INF-30