Update With The Sd Memory Card; Preparation; Update Procedure - Panasonic AG-HPX500 Service Manual

5-3. Update with the SD memory card

CAUTION: Before Updating Software
● Do not power down or pull card while upgrading.
part writing condition and the restart is not made. However software can not be update, please contact Panasonic
Service Engineering.

5-3-1. Preparation

< Preparation for SD memory card >
1. SD memory card (more than 64MB memory card) is required.
2. Insert an SD memory card into the P2 equipment and format it.
NOTE: SD memory card used in the P2 equipment requires to be conformed to SD
SD memory card with P2 equipment. To format SD memory card using a personal computer, download the
proper software from the download site (P2 support desk).
< Copy of Image data for update >
1. Download the file "VVVSI*****.zip" from Global Service Web Site.
2. Copy the file "VVVSI*****.zip" to hard disk of your PC and extract the file.
3. Insert a formatted SD memory card into the card slot of PC.
4. Copy the folder "PRIVATE" to SD memory card. The downloaded image data (upgrade file: VSI*****.img) is
included in folder "PRIVATE".
NOTE: Do not change the construction of folder and file name. The folder construction shown in the following and
top of directory should be "PRIVATE".
Folder: PRIVATE MEIGROUP PAVCN SBG P2SD FW
File Name: VSI*****.img
< External Power >
It is best to power the unit from the external power supply. This will prevent the unit from shutting off during updating.
5-3-2. Updated procedure
1. Turn on power this unit.
2. Press the MODE button to set to MCR mode.
3. Insert a formatted SD memory card into the SD card insertion slot of this unit.
4. Press the THUMBNAIL MENU button to display the menu on thumbnail screen.
BUSY lamp
SD card
If the program quits during loading, the data will be erased or
Thumbnail screen
(GUI)
CURSOR button
THUMBNAIL MANU button
INF-18
TM
standards. Be sure to format
MODE button
SET button
CURSOR button