7-2-2. Write data of SYS EEPROM
1. This camera recorder is set to CAM mode.
2. Select "SYSCON(S)" section after start up the PC EVR software, and click "OK" button.
3. Select "Open Image File(O)" in "File(F)" menu, the screen for selecting the file to be written will appear.
4. Select the file to be written in the Camera-Recorder.
5. Click "Open(O)" button in the Open screen and reading starts.
6. Select "EEPROM Write(W)" in "File(F)" menu, following message will appear.
When "Cancel(C)" button is clicked, writing EEPROM data is canceled.
When "OK" button is clicked, the writing starts.
7. Red is displayed to the status lamp while writing it. When writing is completed, the status lamp changes into a
blue display.
INF-38