Data Init; External - Panasonic AG-HPX500 Service Manual

4-5. DATA INIT.

The GUI menu and the meta data is initialized by executing the DATA initialization (Initialization of FLASH on
CODEC board.).
In the following cases, please execute the DATA initialization.
● When the FLASH ROM(IP202 and 203) on CODEC board are exchanged.
● When the CODEC board is exchanged.
● When the destination setting of the CODEC board is changed.
NOTE: Please turn OFF and ON the power before and after the DATA initialization is executed.
1. Select the item "DATA INIT" on the service menu and press the SET button. The confirmation menu of the
execution is displayed.
2. Select the item "YES" and press SET button.

4-6. EXTERNAL

NOTE: This menu is only use at factory.
1. Select the item "EXTERNAL" on the service menu and press the SET button. The confirmation menu of the
execution is displayed.
INF-15