11-2-2. CAMERA Board
Is it possible to backup the
data of CAM EEPROM ?
Please operate following < Procedure 2 >
< Procedure 1 >
*NOTE
Confirm that the software version.
・ CAM MICON・ CAM FPGA
・ CAMBE FPGA ・ CAM EEPROM
Be the latest version.
(Refer to Global Service WEB Site about
number of latest version.)
CAMERA Adjustment is required.
Regarding required adjustment items, refer to item "11-3-1. CAMERA Adjustment" (page INF-51).
YES
NO
Overall Check
Refer to item "7. Save and write EEPROM data" on page
INF-32 about save and writing procedure.
Backup the CAM EEPROM data.
Exchange the CAMERA board.
NOTE:
An abnormal screen might be displayed.
(In case of the SYSTEM FREQ. set to the
CODEC side and the SYSTEM FREQ. on
the CAMERA side are the disagreements.)
Turn the power OFF and ON.
(Normal screen is displayed.)
Load the backup data to new board.
*NOTE:
The CAM MICON、CAM FPGA、CAMBE FPGA and
CAM EEPROM do not required update.
If writing is necessary, please contact Panasonic
Service Engineering.
INF-48
Turn the power ON.